4. You may continue to listen to the voice prompts, or you may
Command Function Command Function
0 then 1 Repeat a Message 0 then 6
Answering
Machine On
0 then 2
Play incoming
Messages
0 then 7
Memo Record/
Stop*
0 then 3 Skip a Message 0 then 8
Greeting Message
Record/Stop*
0 then 4 Delete a Message 0 then 9
Answering
Machine Off
0 then 5 Stop Operation 0 then 0 Voice Prompts
time you enter the corresponding command, it starts the
recording automatically. If you want to stop the recording,
enter the command again.
5. After all of the voice prompts have been played, you will
hear intermittent beeps indicating that the system is in the
command waiting mode. You may enter another command at
this time from the chart.
automatically returns to standby.
If you enter an incorrect security code three times,
you will hear a beep and the system will return to
standby.
The voice memo messages are recorded as
incoming messages.
When the answering system is full, you cannot
record a voice memo message until you clear some
messages from the memory.
•
•
•
To Next Page
Loading...
