OWNER’S MANUAL
NOTE: See the “Device Table”on page 8 when choosing a device key for programming.
5. Use the Manufacturer’s Codes (starting on page 69) to locate the type of
device and brand name and then use the number keys to enter the first
four-digit code for your device.If performed correctly, the bottom IR
segment will flash twice.
NOTE: If the bottom IR segment displays one long flash instead, a mistake has
occurred. Try entering the same code again.
6. Aim the remote at the device and press POWER once. The device should
turn off. If it does not,repeat steps 5 and 6, trying each code for your
brand until you find one that works.If it still doesn’t work, try Searching
For Your Code on page 13.
7. If the code works, press OK once. The bottom IR segment flashes twice.
8. If desired, repeat steps 4 through 7 for each device you want to control.
When finished, press twice to exit programming and return to the
last-selected device menu screen.
9. For future reference,write down the working device codes in the
following boxes:
VCR Code:
Brand Name:____________________
TV Code:
Brand Name:____________________
CBL/SAT Code:
Brand Name:____________________
DVD Code:
Brand Name:____________________
Programming A Device 11
To Next Page
Loading...
