OWNER’S MANUAL
5. For this example, the VCR key is now ready to be set up to control your
second DVD player.See Programming A Device on page 10.
6. Exit programming by pressing once.The display will return to the
last-selected device menu screen.
SETTING THE TILT SWITCH
The RadioShack 4-in-One Remote contains a Tilt Switch that activates the
display when the unit is moved. If desired, you can disable it so only
pressing a key will turn on the display.
NOTE: Disabling the Tilt Switch can help conserve battery life.
DISABLING THE TILT SWITCH
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear.:
2. Press above OTHER once. The Other programming screen will appear:
3. Using the number keys, enter 9 8 5. The bottom IR segment will flash
four times, confirming the Tilt Switch is disabled.The program keys will
appear again.
4. Exit programming by pressing once.The display will return to the
last-selected device menu screen.
continued on next page...
Reassigning Device Keys/Setting The Tilt Switch 23
To Next Page
Loading...
