OWNER’S MANUAL
7. Press OK once.The bottom IR segment flashes twice.
8. (Optional) If you’ve located a setup code that works,but it also has a
separate VCR code as listed on page 70, you’ll need to program it into the
remote to access VCR controls, as follows:
a. Press VCR once.
b. Using the number keys, enter the four-digit VCR code for your device.
If performed correctly, the bottom IR segment will flash twice.
c. Press OK once.The bottom IR segment displays one long flash.
NOTE: If a VCR setup code is not listed, you can use the VCR key to program a
separate VCR or another device (see “Reassigning Device Keys”on page 22).
9. To exit programming, press twice.The display will return to the last-
selected device menu screen.
10. For future reference,write down the working code in the below boxes:
DVD Player/VCR Code:
Brand Name:____________________
VCR Code (if used):
Brand Name:____________________
SEARCHING FOR YOUR CODE
If your device does not respond to the RadioShack 4-in-One Remote after
trying all codes listed for your brand, or if your brand is not listed at all, try
searching for your code.
NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the
device and insert the required media.
For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
continued on next page...
Programming A DVD Player/VCR Combo/Searching For Your Code 13
To Next Page
Loading...
