OWNER’S MANUAL
ADJUSTING BRIGHTNESS
The RadioShack 4-in-One Remote has five levels of brightness adjustment
and is set to the middle one at the factory. To adjust brightness, perform the
following steps:
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
NOTE: If the display turns off because of inactivity, you will need to start the
programming sequence again by repeating this step.
2. Press above BRIGHT. once. The Brightness programming screen
will appear:
• To increase brightness, press ▲ one or more times.
• To decrease brightness, press ▼ one or more times.
3. When desired brightness is achieved, press twice to exit programming
and return to the last-selected device menu screen.
NOTE: The remote includes a tilt switch that turns on the display when the unit is
moved. If desired, you can disable this feature. See “Setting The Tilt Switch” on page 23.
Adjusting Brightness 9
To Next Page
Loading...
