OWNER’S MANUAL
2. Press above OTHER once. The Other programming screen will appear:
3. Using the number keys,enter 9 8 0.The bottom IR segment will flash twice,
pause,and flash twice again to confirm restoration.
4. Exit programming by pressing once.once.The display will return to the
last-selected device menu screen.
TROUBLESHOOTING
PROBLEM: No display at all times.
SOLUTION: Replace batteries with four new AAA alkaline batteries.
PROBLEM: No display when programming.
SOLUTION: Display has turned off due to inactivity. Start programming
again and do not pause while performing instructions.
PROBLEM: During programming, the bottom IR segment displays a
long flash.
SOLUTION: An invalid entry has occurred.Check the keys to be pressed
and start program again.
PROBLEM: How do I stop programming?
SOLUTION: Press once to return to the program keys screen.Press it
once more to exit completely.
PROBLEM: The unit does not control home entertainment devices or
commands are not working properly.
SOLUTION: Try all listed codes for the device brands being set up. Make
sure they can be operated with an infrared remote control.
continued on next page...
Clearing All Custom Programming/Troubleshooting 25
To Next Page
Loading...
