OWNER’S MANUAL
2. Press above VOL. LOCK once. The Volume Lock programming screen
will appear:
3. Press VOL
▼ once. Then press a device key once (i.e.,VCR,TV,CBL/SAT,or
DVD) where you want the volume controls unlocked.The bottom IR segment
will flash four times and the program keys will appear again.
4. If desired, repeat steps 1 through 3 (of this section) for each device that
you want volume to be unlocked.
5. To exit programming, press twice.The display will return to the last-
selected device menu screen. Now,after you select a device that has vol-
ume unlocked, pressing VOL
▲,VOL ▼,or MUTE will control the device’s
volume only in its own mode.
UNLOCKING ALL VOLUME CONTROL (RESTORING DEFAULT SETTING)
1. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
2. Press above VOL. LOCK once. The Volume Lock programming screen
will appear:
3. Press VOL ▲ once. The bottom IR segment will flash four times, and the
program keys will appear again.
4. To exit programming, press twice.The display will return to the last-
selected device menu screen.Volume will again be independently con-
trolled according to its default states for all programmed devices.
Changing Volume Lock 17
To Next Page
Loading...
