84
Beyond the Basics
1. Press PROG.
2. Press TRUNK to enter a talk group ID memory mode.
3. Select a talk group ID bank using FUNC, e or d.
4. Press FUNC then 6. Clear entire list ? Press 1 to clear all, any
other key aborts appears.
5. Press 1 to clear all talk group IDs within a bank. List
cleared. appears.
To cancel the deletion, press any key except 1. The
scanner returns to the talk group ID memory mode.
changing the open/closed mode
1. Press MAN.
2. Press FUNC then e or d to select the channel
storage bank.
3. Press FUNC then ./DELAY. Bank OPEN. or Bank
CLOSED. appears. After that message disappears,
the fi fteenth digit on the second line of the display
changes from + to – or vice versa.
4. Repeat Steps 2 and 3 for each bank.
To Next Page
Loading...
