Your Equipment
•.
Carefully unpack the Built-in Hard Disk system and make sure you
have the following items:
Display
Console
Keyboard
Power Cord
You
should also have these programming manuals:
• TRS-XENIX Operations Guide
• TRSOOS-I/ Reference Manual
(includes addendum)
• BASIC Reference Manual
On
all hard disk units, flaws
in
the media are identified before the •
disk drives are delivered to you. Attached to the inside the access
panel
on
the back of your display console or the bottom of your
Secondary Hard Disk Unit (if you have one)
is
a DISK FLAW
RECORD which specifies the errors
on
your particular unit.
Do
not
throw this map away!
You
may need to refer
to
it when formatting
the disk and Radio Shack service technicians may need to refer to
it
if your drive ever needs servicing.
At the front of your manuals, you'll find these floppy diskettes:
• TRS-XENIX
Systems Diskettes (3)
• TRSDOS-II
Systems Diskette
with BASIC Interpreter
• Thinline TRSDOS 2.0b
Diskette with BASIC
Interpreter
(Chapter 2 explains how to prepare diskettes for information
storage. Diskettes must be handled carefully, so read Chapter 2
before you use your diskettes.)
Note: Your system may also include
an
optional secondary
stand-alone hard disk drive unit (Drive 5) and/or a floppy diskette
expansion unit with up to two drives (Drives 2 and
3).
These •
units are optional extras.
Save the packing materials
in
case you need to transport your
system.
6
To Next Page
Loading...
Need help?
General
