•
•
•
Installing Your System
Improperly Connecting or grounding the System exposes you to
the danger of electrical shock.
It
also endangers your System and
data. Follow these installation instructions carefully.
1.
Place your Built-in Hard Disk System near a grounded, 120
VAC, 3-prong outlet that does not power heavy machinery,
copiers, or office machines with defective switches. (or use a
grounded power strip such as Radio Shack's Plug-In Power
Strip.)
2.
Make sure all equipment
is
turned off.
3.
Connect the keyboard's built-in cable
to
the display console.
4.
Plug the power cord into the back of the display console.
5.
Plug the power cord directly into the outlet or grounded power
strip specified
in
Step 1.
9
To Next Page
Loading...
