Error Message Explanation/ Action
•
BOOT
ERROR
CRG
error. Invand
Re-initialize the hard
HC
data
in
data
field
disk
or
contact
RSSC.
BOOT
ERROR
Controller error. Busy
a.
Re-initialize the
HD
not reset.
hard disk.
b
Power down, wait
10
seconds, and
power up.
If the error
occurs
again, contact
RSSC.
BOOT
ERROR
CRC error, Invalid
Re-initialize the hard
HI
data
in
10
field. disk.
BOOT
ERROR
Data address mark Re-initialize the hard
HM
not found. disk,
BOOT
ERROR
10
not found. No Boot
Re-initialize the hard
HN
Track. disk,
BOOT
ERROR
Track
Q)
error on hard
H0
disk.
a.
Didn't find Track 0
a.
Press
tBnm.
before time-out.
b.
Contact
RSSC.
b.
Secondary hard
disk drive is not on.
BOOT
ERROR
Time-out while waiting
•
HT
for Ready.
a,
Hard disk drives
a
Contact
RSSC.
not powered up. b Press
rBEIrn.
b.
Hard disk drive c
Connect
the hard
isn't turned on and disk drive or oper-
ready within 1
(,7)
ate under floppy
seconds after the disk control.
computer,
c
Hard disk drive
is
disconnected.
BOOT
ERROR
Lost data during read Try another system
LD
-
FOC
(floppy disk diskette or contact
controller) or drive
RSSC
fault.
BOOT
ERROR
Memory failure
in
Contact
RSSC
MF
address range
X'1000'-X'7FFF'.
BOOT
ERROR
Memory failure
in
Contact
RSSC.
MH
address range
X'8000·-X'FFFF'.
BOOT
ERROR
Memory failure
in
Contact
RSSC
ML address range
X'0000'-X'0FFF'.
•
45
To Next Page
Loading...
