Radiolink Electronic Ltd
www.radiolink.com
1. PIXHAWK Introduction
Redesigned the circuit after totally understanding the circuit design and program code of PIXHAWK, achieved
less interference of inner components, less noise, more accurate compass and safety while flying, resolved
the problem that Altitude Hold was not so much precision. Complete automatic, anti-static form SMT to
welding achieved less interference of inner components.
Full mechanical, anti-static fully automated welding from patch to backhand welding, to achieve reducing
interference of geomagnetic sensors, which greatly improves the efficiency of production inspection.
All the chips such as processor, sensors and others are imported with whole package by primary agency.
Dust-free and environmentally-friendly workshop ensures its durability.
Note PIXHAWK can flash firmwares and setup parameters with the official Mission Planner downloaded via
http://www.radiolink.com.cn/firmware/MissionPlanner/MissionPlanner-latest.msi .
1.1 Connectors
To Next Page
Loading...
