continue to scroll as a reminder that it is still possible
to view the text of the points in alarm by using the
View Memory function. See VIEW MEMORY?
(Command 40) for more information. To clear the
event memory and remove the ALARM SILENCED
message from the display, enter a valid passcode and
press the ESC key, or re-arm the area.
Burglary Alarms
Burglary alarms are the second priority. When a
burglary point activates while your system is armed,
your command center emits a steady high-pitched
burglary tone. The tone sounds for the time set by your
security company.
The command center display shows the number of
burglary points activated (A1 ## ALARMS) and then
custom text for each activated point. Press NEXT to
manually scroll the list if you wish. Events scroll from
the oldest to the newest.
Silencing Burglary Alarms
Entering a personal passcode with the proper authority
level silences a burglary alarm and disarms the system
if it was armed. The system will now display ALARM
SILENCED and then the number of points in alarm
(A1 ## ALARMS) and the custom text of all the points
in alarm, in the order of occurrence. Entering
COMMAND 4 clears the scrolling point text from the
display. The ALARM SILENCED message will
To Next Page
Loading...
Need help?
General
