Radionics Security System 8112 - Silence Trouble Sounder and Clear Display (COMMAND 4); Executing COMMAND 4

4
Silence the Trouble Sounder & Clear
Trouble Display COMMAND 4
Description
Use COMMAND 4 to silence the trouble sounder
during system events. This command also clears
system messages from the display. The ALARM
SILENCED display may continue to scroll to remind
you that cleared events can be seen with the View
Memory function (seeView Memory ?).
Using COMMAND 4:
1. Press the COMMAND bar. The display shows
SYSTEM COMMAND.
2. Press the 4 key. The Command Center sounder is
silenced.