Radionics Security System 8112 - Special Alerts: Commands 7 and 9; Using Command 7 for Special Alerts

Using COMMAND 7:
1. Press the COMMAND bar. The display shows
SYSTEM COMMAND.
2. Press the 7 key. Your COMMAND 7 special alert
has been programmed to:
___ notify your alarm company
___ ring a bell on your premises
___ display at your command center
Description:
_____________________________________________________
________________________________________________________________
__________________________________________________________________
__________________________________________________________________
7
&
9
Special Alerts COMMAND 7 and
COMMAND 9
Description
COMMANDs 7 and 9 can be programmed to respond
to a choice of numerous situations that may need
immediate attention. They may also be used to send a
silent alarm to your security company without
sounding an alarm signal on the premises. Check with
your security company for the options they offer.