Keystroke Checking Tones
Valid Entry
If you press an appropriate key for the function or entry
you desire, the command center sounds a muted beep
tone, indicating it accepted your keystroke.
Invalid Entry
A flat buzz tone sounds when you press a key that
doesn’t have a function to execute or when the
command center has no information to display.
Silencing an Alarm
The audible alarm sounds for a specific period of time
before it automatically shuts off. If an alarm occurs and
you want to silence the siren before the time expires,
simply enter your personal passcode and press ENT.
To SILENCE an alarm:
• Enter your passcode and press ENT.
How Your System Reports Alarms
Your security system may be programmed to
automatically disconnect your telephones when
sending reports to your security company. Once the
report is completed, your security system returns the
telephones to normal operation (check with your
security company).
Your system makes repeated attempts to send reports
to your security company. In the event your security
system fails to communicate, the command center
buzzes and displays SERVC COMM FAIL. Notify
your security company of the communications failure.
Note: If your telephone service is interrupted, your
security system cannot send reports to your security
company unless it has an alternate means of
transmitting them.
To Next Page
Loading...
Need help?
General
