NO AUTHORITY
The system does not recognize the passcode entered.
NOT AUTHORIZED
The passcode entered does not have the authority to
Force Arm.
PERIMETR DELAY
Indicates that the perimeter is armed (turned on) with
entry/exit delay time.
(See Turning the System On With Delays )
PERIMETR INSTANT
Indicates that the perimeter is armed (turned on)
without entry/exit delay time.
(See Turning the System On Without Delays )
FIRST DISARM
Indicates that the function requested can only be
performed when the area is disarmed. Disarm the area
to perform the function.
Standard Displays
Your command center uses standard and custom
displays to show the status of the security system. Many
standard displays are described below. Your system
may not use all of them. Descriptions of your custom
text follow.
SYSTEM COMMAND
Displays when you press the COMMAND bar. The
system is waiting for you to enter a one or two digit
number to complete the command.
DISARM NOW
When the system is turned on, entering through a delay
door starts entry delay time. The command center emits
a tweedle tone and displays DISARM NOW.
You must turn off the system before entry delay time
expires to avoid creating an alarm event.
EXIT NOW
Arming your system starts exit delay time. The
command center emits a repeating beep tone and
displays EXIT NOW.
To Next Page
Loading...
Need help?
General
