Radionics Security System 8112 User Manual

Using Perimetr Delay:
1. Interior points are not armed with this command
and may remain faulted while arming with
COMMAND 3.
2. Press the COMMAND bar. The display shows
SYSTEM COMMAND.
3. Press the 3 key.
Note: If you prefer, you may use the Command Menu
in place of steps 2 and 3 to initiate this function. Press
the MENU key to enter the Command Menu, then
press NEXT repeatedly until you reach the
PERIMETR DELAY ? prompt. Press ENT.
4. The display shows EXIT NOW # (# = exit delay
time remaining). After the exit delay expires,
PERIMETR DELAYED is displayed.
5. To disarm your security system, enter your
personal passcode and press ENT.
3
PERIMETR DELAY ? COMMAND 3
Turn On the Perimeter With Delays
Description
In residential systems this function allows you to only
arm the perimeter and exit through a door programmed
for exit delay. The interior of the building remains
disarmed. People or pets are free to move throughout
the interior of the premises.
This function is also useful in commercial systems
when you are working before or after business hours
and wish to have the perimeter armed. Other system
users can enter through doors programmed for entry
delay, which will start the entry delay sounder and
countdown.

Radionics Security System 8112 Specifications

General

Brand	Radionics
Model	Security System 8112
Category	Security System
Language	English