Turning the System Off (Disarming)
Your security system is turned off by entering your
personal passcode. When the system is turned on, you
must enter through a designated entry door to prevent
an instant alarm condition. Opening the door starts
entry delay time and the Command Center emits a
pulsing “beep” tone to remind you to turn the system
off. Enter your passcode before the delay time expires
and the system will turn off.
If you enter through the wrong door or fail to disarm
before the entry delay time expires, you will cause an
alarm. If this happens, silence the alarm (by entering
your personal passcode and pressing ENT) and call
your security company to let them know that it is not an
emergency situation.
To Turn Your Security System Off
(Disarm):
1. Enter your personal passcode and press ENT.
2. You must press the ENT key within 8 seconds of
entering your passcode, or the passcode entry will
be invalid. The display returns to idle disarmed
text.
To Next Page
Loading...
Need help?
General
