- 92 -
• boost mixture weight, weigh as much as required to provide specified weight value,
• press button to confirm, mixture dosing ends, formulation report is printed and recorded in a
database (read next section of this manual to view an example of the report), the following
message is displayed:
,
• press button in order to proceed to other opersations.
or:
• with the last ingredient dosed and weighed, press button,
• wait to see the following message: , press button
again in order to resign from boosting mixture weight to a specified value, if there is such a
need,
• wait to see the following message: ,
• press button to confirm, mixture dosing ends, formulation report is printed and recorded in a
database (read next section of this manual for an example of the report), the following message
is displayed:
,
• press button in order to proceed to other opersations.
PROCEDURE 2 – Preparing formulation that is saved in the Formulation Database. Basic option for
creating recipes.
Following the prompts:
• load container intended for the ingredients,
• go to quick access bar and press Start < > button,
• list of formulations is displayed, select the formulation that is to be carried out,
To Next Page
Loading...
