Return to weighing mode
- Press MODE key, the display indicates list of available
working modes
- move the cursor next to a field: MO Weighing
- Press RIGHT ARROW KEY, the software returns to weighing mode and
displays current measurement result
18.1.2. Counting by determining mass of a single part from a standard
quantity
Enable parts counting mode regardless on mass that has to be specified in field 01. Move
the cursor next to a field 07 Run and press RIGHT ARROW KEY. While in parts counting
mode press F key. The display opens a window for specifying standard quantity of counted
parts (fields 01 – 04) or set the standard quantity in field 05 – Sample.
Fig. 31. Counting by determining mass of a single part from a standard
quantity
Next, press RIGHT ARROW KEY and follow commands presented on the display.
Fig. 32. Display content with enabled AAC function
1- mass of a single part
2 - mass of all counted parts
3 - the pictogram of enabled Automatic Accuracy Correction function
To Next Page
Loading...
Need help?
General