RADWAG WLC/A2 User Manual

9
5. UNPACKING AND INSTALLATION
• Unpack the device and place it on a flat and even surface. Keep it far
away from any sources of heat.
• Install the weighing pan, follow the below figures:
WLC/A1 precision scale WLC/A2 precision scale
5.1. Under-Pan Weighing
The WLC/A1, WLC/A2 scales enable weighing loads below scale (so called
under-pan weighing). This is an alternative for loads of non-standard
dimensions and shapes, and for loads generating magnetic field.
Preparing the scale for the under-pan weighing:
1. Unpack the scale, assembly it
following section 5 of this user
manual.
-
2. Put the scale right side down.

RADWAG WLC/A2 Specifications

General

Readability	0.01 g
Pan Size	195 x 195 mm
Calibration	External
Display	LCD (backlit)
Communication	RS 232
Power Supply	100 - 240 V AC 50 / 60 Hz
Repeatability	0.01 g
Stabilization Time	3 s
Operating Temperature	+15°C - +30°C