RADWAG WTB series

Procedure:
1. Supply the indicator from mains.
2. Charge batteries for 12 hours (time of charging 2200mAh batteries).
3. After 12 hours unplug from mains.
4. Use the device up to the moment of self powering down.
5. Repeat the process of charging starting from point 1.
Notice:
They reach their optima capacity after three cycles of full charging
and discharging.
16. OPERATION MODES
16.1. Setting accessibility of operation modes
In this parameter group users can disable/enable accessibility of functions
after pressing
key.
Procedure:
• Enter the submenu <P4.Func> and then:
- 34 -