Return to weighing:
• Press the
key twice.
16.6. Automatic tare
This function is useful for fast net mass determination of weighed load
in case when tare value of is different for each load. In case when the
function is active the cycle of scales operating looks as follows:
• press zeroing key when the pan is empty,
• place the container for pieces,
• when indication is stable automatic tarring of the container mass will
be performed (Net marker will appear in the upper part of the display),
• place a sample into the package,
• display will indicate net mass of sample,
• remove the sample together with the container,
• display will indicate tare mass with minus sign,
• place a container for the next sample. When indication is stable
automatic tarring will take place (Net marker will appear in the
upper part of the display),
• place next sample into the package.
Procedure:
Return to weighing:
• Press the
key twice.
- 42 -
To Next Page
Loading...
Need help?
General
