RADWAG WTB series

10. INSCRIPTIONS ON THE DISPLAY
No Text string Description
1 FIL
Filter level
2 bAud
Transmission baud rate
3 PCS
Piece counting
4 HiLo
+/- control according to a standard mass
5 rEPL
Automatic printout
6 StAb
The condition of printing data
7 Auto
Autozero correction
8 t1
Power save – time to switch off while no operation
9 toP
Latch of the max measurement
10 Add
Totalizing
11 AnLS
Weighing animals
12 tArE
Memory of 9 tare values
13
Indication in autozero zone (indication = exact zero)
14
Stable result (ready to read)
15 PCS Operation mode - counting pieces
16 kg (g) Operation mode - weighing
17
Rechargeable battery pack or battery discharged (BAT-LO)
18 Net
Tare function has been used
19 Min
+/- control with reference to the standard mass : setting
the lower threshold or mass below the first threshold
20 OK
+/- control with reference to the standard mass:
load mass between the thresholds
21 Max
+/- control with reference to the standard mass: setting
the upper threshold or mass over the second threshold
- 12 -