A Sector consists of a BS and a group of SUs within the angular sector covered by the BS
antenna. A Sector is typically 60° or 90° depending of course on the choice of antenna.
BSs may be collocated to provide sectorial coverage up to 360°.
The RF characteristics of a Sector will be common to each radio: Frequency (regulation),
band and channel bandwidth. Adjacent Sectors in a PtMP network will typically use different
frequencies and non-overlapping bands to mitigate mutual BS interference.
The RADWIN 5000 HPMP product suite supports considerably higher capacity than other cur-
rent technologies (such as Wi-Max). We distinguish between generic BSs and SUs and RAD-
WIN units, relabelling the latter, HBSs and HSUs (H=hich capacity).
Key features of RADWIN 5000 HPMP
» 100 Mbps aggregate net throughput, full duplex
» Configurable Maximum Information Rate (MIR) per HSU
» Long Range – 40km @ 20Mbps
» Advanced OFDM & MiMO 2x2 for nLOS performance
» Enhanced interference mitigation capability
» Inter & intra site sync. to reduce self interference
» Long range – up to 40 km/25 miles
» Dedicated traffic bandwidth allocation ensuring SLA & latency
» Low latency – min < 3ms, typical 4 to 10ms
» Channel bandwidth – 20 MHz
» Regulation - FCC/ETSI/WPC/UNI /MII
» Multi band HBSs and HSUs
» Simple to deploy
» Fully integrated with RADWIN Legacy solutions:
• Coexists with RADWIN 2000 and WinLink 1000 products
• Common RADWIN Manager
To Next Page
Loading...