At this point you should field-install the units according to the guidelines in Chapter 3. You
should now revert your network card to the Sector Subnet.
Activating the HBS
With all the units in place, log on to the HBS using the new IP address. The main window
looks like this:
Figure 5-6: HBS ready for configuration and activation
Activating the HBS enables it to be discovered by the HSUs. An Activation Wizard will guide
you through the process.
To activate an HBS:
1. Click the Activate button. The Activation Wizard opens.
To Next Page
Loading...
Need help?
General
