Figure 4-3: Extended log-on window
At the User Type field, click the list button:
Figure 4-4: Log on window exposing the user types.
There are three user types:
• An Observer has read-only access to the sector. An Observer can monitor the sector,
generate reports, but may not change any sector parameters.
• An Operator can install and configure the sector.
• An Installer can, in addition to functioning as an Operator, also change the operating
frequency band (or regulation). The latter function has legal ramifications, requiring
familiarity with local regulations.
If you are connecting through the RNMS server check the RMNS connect button and enter
your server IP address.