Rain Bird WPX2 User Manual

WPX Battery-Operated Controller
1
Rain+Birdt
WPX Battery-Operated Controller
Controls and Indicators ....................2
Operating Modes ..................................... 2
Introduction ..................................... 2
Operation and Setup ........................ 2
Contractor Rapid Programming
TM
......... 2
Set Date & Time ....................................... 2
Set Irrigation Schedule ........................... 3
Select Zone .................................................................3
Set Zone Watering Run Times ..............................3
Set Zone Watering Start Times ............................3
Set Zone Watering Days ......................................... 3
Custom Days .........................................................3
Watering Day Options .......................................3
Cyclic Days ........................................................ 3
Odd Days / Even Days .................................... 4
Auto Run .................................................. 4
O ............................................................. 4
Manual Watering ..................................... 4
One-touch Manual Start ......................... 4
Seasonal Adjust ....................................... 4
Special Features ............................... 5
Delay Watering ........................................ 5
Contractor Default Save.......................... 5
Contractor Default Restore ..................... 5
Factory Default Restore .......................... 5
Rain Sensor Bypass ................................. 5
Installation ....................................... 5
Valve Wiring ............................................. 5
Batteries ................................................... 6
Replacing Batteries .................................................. 6
Optional Rain Sensor .............................. 6
Troubleshooting ............................... 7
User Manual - Table of Contents

Rain Bird WPX2 Specifications

General

Brand	Rain Bird
Model	WPX2
Category	Controller
Language	English

Summary

Operation and Setup

Contractor Rapid Programming

Controller copies start times and watering days from Zone 1 to all other zones initially.

Set Date and Time

Set the current Date and Time of day, including format selection.

Set Irrigation Schedule

Select Zone

Choose the specific zone for programming irrigation settings.

Set Zone Watering Run Times

Set the duration (in minutes) for each zone's watering.

Set Zone Watering Start Times

Define the specific times watering will begin for each zone.

Set Zone Watering Days

Specify which days of the week watering will occur for each zone.

Cyclic Days Watering

Set watering to occur every X days within a specified range.

Odd/Even Days Watering

Set watering based on odd or even days of the month.

Controller Modes and Functions

Auto Run Mode

Watering occurs automatically according to programmed irrigation schedules.

Manual Watering

Start watering immediately for ALL Zones or for any ONE Zone.

Off Mode

Stops any active watering and disables automatic irrigation.

One-touch Manual Start

Water all zones immediately according to their scheduled run times.

Seasonal Adjust

Increase or decrease watering duration by a percentage for all Zones.

Special Features

Delay Watering

Delay automatic irrigation for up to 9 days.

Contractor Default Save

Save irrigation schedules for future retrieval.

Contractor Default Restore

Restore previously saved irrigation schedules.

Factory Default Restore

Restore the controller's factory default settings.

Rain Sensor Bypass

Set sensor to Active or Bypass for all zones or individual zones.

Installation

Valve Wiring

Connect solenoid wires to the controller and optional Master Valve.

Batteries and Optional Rain Sensor

Replacing Batteries

Instructions for installing one or two 9-Volt batteries.

Optional Rain Sensor

Instructions for connecting an optional rain sensor.

Troubleshooting