RainPoint ITV101P User Manual

1. Turn dial to "START TIME".
2. Use the "+" button to set the sta time and press the "OK" button
to conrm.(If you choose 12-hour mode, please note AM and PM)
3. After conrming this plan, press the "OK" button again to switch to the
next plan.
4. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
Tips:
1. Press and hold the "+" button can increase the time quickly.
2. If you want to turn o a ceain plan, please adjust the sta time
to "23 : xx" (24-hour mode) or "11 : xx" PM (12-hour mode) when
setting the plan. Then press the "+" button again, and "OFF" will
appear on the screen, indicating that the plan has been closed.
3. If you want to cancel the "OFF" plan, press the "+" button again on
the plan to set its sta time.
4. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
START TIME STEP 2:
- 08 -

RainPoint ITV101P Specifications

General

Brand	RainPoint
Model	ITV101P
Category	Timer
Language	English