RainPoint ITV101P - Programming Your Timer; Step 1: Set Clock

PROGRAMMING YOUR TIMER
SET CLOCK STEP 1:
Tips:
1. Press and hold the "+" button can increase the time quickly.
2. When the setup of this STEP is nished, please turn the dial to save
the changes instead of press the "OK" button. If you press the "OK"
button after setting, it will return to the previous setting instead of
saving it.
1. Turn dial to "SET CLOCK".
2. " " ashing: Use the "+" button to select the day of the week,
then press "OK" to conrm.
3. " " ashing: Use the "+" button to set hour and press "OK" to
conrm.Press and hold the "OK" button to switch the time display in
12-hour or 24-hour mode.
·12-hour mode: with "AM" or "PM"
·24-hour mode: without "AM" or "PM"
4. " " ashing: Use the "+" button to set minute and press "OK" to
conrm.
5. Turn the dial clockwise to save the changes in this STEP and go to
next STEP.
- 07 -