Raise3D Pro2 - Electromagnetic Compatibility - EMC; Simplified EU Declaration of Conformity; CE Mark Warning; FCC Statement

3D PRINTER MANUAL- RAISE3D PRO2 SERIES
- 4-
www.raise3d.com
Electromagnetic Compatibility - EMC
⚫ Simplified EU Declaration of Conformity
Pro2/Pro2 Plus declares that this device is in compliance with the essential requirements and other
relevant provision of Directive 2014/53/EU. Full text of EU declaration of conformity is available at
https://www.raise3d.com
The WIFI operation in the band 5150-5450MHz shall be restricted to indoor use for countries listed in the
table below:
AT
BE
BG
CZ
DK
EE
FR
DE
IS
IE
IT
EL
ES
CY
LV
LI
LT
LU
HU
MT
NL
NO
PL
PT
RO
SI
SK
TR
FI
SE
CH
UK
HR
CE Output power table:
Function
Frequency
Maximum Output Power (EIRP)
WiFi
2412-2472 MHz
18.25dBm(b)/ 16.30dBm (g)/ 15.21dBm (HT)
5150-5250 MHz
15.9 dBm(a)/ 14.71 dBm(HT20)/ 14.28 dBm(HT40)
5725-5850 MHz
15.9 dBm(a)/ 14.71 dBm(HT20)/ 14.28 dBm(HT40)
FCC Output power table:
Function
Frequency
Maximum Output Power
WiFi
2412-2462 MHz
18.31dBm(b)/ 15.62dBm (g)/ 14.9dBm (HT 20)
5150-5250 MHz
15.36 dBm(a)/ 14.79 dBm(HT20)/ 14.41 dBm(HT40)
5725-5850 MHz
15.48 dBm(a)/ 14.49 dBm(HT20)/ 14.06 dBm(HT40)
⚫ FCC Statement
This device and its antenna must not be located or operating in conjunction with any other antenna and
transmitter.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
CE Mark Warning
This is a Class B product, in a domestic environment, may cause radio interference, in which case the
user may be required to take adequate measures.