Raisecom RC3000E User Manual

Raisecom
RC3000E (P100R001) Product Description
4 Cards
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
25
DIP bit
Status
Function
Description
OFF
Balanced match
The No.1 way E1 works in balanced mode and is
matched with the impedance at the RX side.
SW1-2
ON
Unbalanced
match
The No.2 way E1 works in unbalanced mode and
is matched with the impedance at the RX side
OFF
Balanced match
The No.2 way E1 works in balanced mode and is
matched with the impedance at the RX side
SW1-3
ON
Unbalanced
match
The No.1 way E1 works in unbalanced mode and
the TX side is grounded.
OFF
Balanced match
The No.1 way E1 works in balanced mode.
SW1-4
ON
Unbalanced
match
The No.2 way E1 works in unbalanced mode and
the TX side is grounded.
OFF
Balanced match
The No.2 way E1 works in balanced mode.
Before delivery, all bits of SW1 are ON.
4.4.7 Cables
Interface
Cable
DB9F
When the interface impedance is 120 Ω, use the CBL-E1-DB9M/2RJ45-
2.5m cable to connect the RC3000E to the RJ45 head.
When the interface impedance is 75 Ω, use the CBL-E1-DB9M/4BNCF-
2.5m cable to connect the RC3000E to the BNC female interface.
4.4.8 Technical specifications
Dimensions: 155 mm (Width) × 100.5 mm (Depth) × 25 mm (Height)
4.5 RC3000-SUB-10FXS/10FXO
4.5.1 Appearance and functions
Panel

Raisecom RC3000E Specifications

General

Brand	Raisecom
Model	RC3000E
Category	Multiplexer
Language	English