Raisecom
RC3000E (P100R001) Product Description
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
It is a data transmission unit, composed of several parts, each of
which has different functions.
In a communication link, both parties can receive and send data
concurrently.
The cable to connect the device to ground, usually a yellow/green
coaxial cable. Connecting the ground cable properly is an important
guarantee to lightning protection, anti-electric shock, and anti-
interference.
In a communication link, both parties can receive or send data at a
time.
Institute of
Electrical and
Electronics
Engineers (IEEE)
A professional society serving electrical engineers through its
publications, conferences, and standards development activities. The
body responsible for the Ethernet 802.3 and wireless LAN 802.11
specifications.
International Telecommunication Union Telecommunication
Standardization Sector
Symbols for cable, chassis, and warnings
It is the process that a signal is sent out and then sent back to the
sender. It is used to detect and analyze potential faults in a ring
network.
In this fiber, multi-mode optical signals are transmitted.
Multiplexing is a method by which multiple analog message signals
or digital data streams are combined into one signal over a shared
medium. Generally, it is used to adapt multiple lower-order path
layer signals into a higher-order path or the multiple higher-order
path layer signals into a multiplex section.
To Next Page
Loading...
Need help?
General
