Need help?Do you have a question about the RAK 7244 and is the answer not in the manual?
Connects to the gateway using Wi-Fi in Access Point mode via a specific SSID and password.
Connects to the gateway using an Ethernet cable, requiring specific IP configuration.
Instructions for logging into the gateway using SSH on a Windows OS via Putty.
Steps to access the gateway via SSH on macOS using the Terminal application.
Details the procedure for SSH access on Linux, similar to macOS.
Guides users through changing the default password for enhanced security.
Sets up the gateway's frequency band and selects a LoRa server (TTN or ChirpStack).
Details methods for connecting the gateway to a router via Wi-Fi or Ethernet for network access.
Covers inserting a SIM card and configuring the gateway for LTE connectivity.
Ensures the gateway is connected and configured for use with the TTN server.
Step-by-step guide to register the RAK7244 gateway within The Things Network (TTN).
Instructions for using the pre-installed ChirpStack instance on the RAK Developer Gateway.
Guidance on setting up a remote ChirpStack instance, either RAK's cloud or self-hosted.
General| Model | RAK 7244 |
|---|---|
| Category | Gateway |
| Wi-Fi | 802.11 b/g/n |
| Power Input | 12V DC |
| Flash Memory | 8GB eMMC |
| LoRa Channels | 8 channels |
| Ethernet | 10/100 Mbps |
| Processor | Quad-Core Cortex-A53 1.2GHz |
| Memory | 512 MB |
| Operating System | Linux |
| LoRa Concentrator | RAK2245 |
| USB | USB 2.0 |
| Operating Temperature | -40°C to 85°C |
To Next Page