V4.1.0R
24
6.Connecting the Gateway to TTN
6.1.Configuring the Gateway
Make sure your Gateway is connected either via LTE, Wi-Fi or Ethernet, as
per the instructions in the previous chapter. You should also be able to
access it via SSH.
Next configure your Gateway to use TTN as a server (follow Section 5.2,
subsection 5.2.1). In our example we are going to be using the EU863-870
band.
6.2.Registering the Gateway in TTN
Open the TTN website https://www.thethingsnetwork.org/, and log in (you
need to have created an account first). After logging in (creating an account),
you should see the page in the image below. In the upper left corner as
shown in the red square, there is a drop-down menu with a “Console” tab you
need to access.
Can you see this page? Click on “GATEWAYS”:
To Next Page
Loading...