Product Description
R&S
®
RT-ZC31
10User Manual 1801.4949.02 ─ 01
2 Product Description
2.1 Product Overview
The R&S RT-ZC31 is a clamp-on current probe that features high current-detec-
tion sensitivity and broad frequency band. The probe uses three current ranges to
detect current waveforms from a few hundred µA to 50 A.
By clamping on the conductor to be measured, the current waveform is captured
easily without interrupting the electric circuit.
2.2 Key Features
●
The sensor head has a clamp design that makes it possible to easily observe
current waveforms while current continues to flow through the conductor being
measured.
●
Three current measurement ranges: 0.1 V/A, 1 V/A, and 10 V/A.
●
You can observe low-current waveforms at the high sensitivity of 10 V/A.
●
LED warnings indicate overload and unlocked sensor head.
●
Broadband frequency characteristics DC to 120 MHz.
●
Demagnetization and automatic zero adjustment functions make it easy to get
ready for measurement.
2.3 Inspecting the Contents
●
Inspect the package for damage.
Keep the package and the cushioning material until the contents have been
checked for completeness and the device has been tested.
If the packaging material shows any signs of stress, notify the carrier and your
Rohde & Schwarz service center. Keep the package and cushioning material
for inspection.
●
Inspect the probe.
Inspecting the Contents
To Next Page
Loading...
Need help?
General
