Product Description
R&S
®
RT-ZC31
16User Manual 1801.4949.02 ─ 01
●
The sensor head is unlocked (JAW UNLOCKED LED is lit up)
●
During an overload condition (the OVERLOAD LED is flashing)
●
When a measured current is detected
(Higher range) key / (Lower range) key
Switch over to a next higher / lower current range.
RANGE LEDs (green lights)
Color State
Lights green The current range is chosen.
Fast flashing Indicates that the device has entered protection mode or a checksum
error has occurred.
2.4.4 Sensor
Description of the Probe
To Next Page
