Measuring Procedure
R&S
®
RT-ZC31
32User Manual 1801.4949.02 ─ 01
3. Wait for a while to let the junction box cool down to a normal temperature.
4. Press any key.
One of the RANGE LEDs (of the range used before the device entered protec-
tion mode) lights up and the device gets back to normal.
The DEMAG / AUTO ZERO LED blinks slowly, which indicates demagnetiza-
tion and automatic zero-adjustment are required.
3.7 Typical Characteristics
All the characteristics shown in this section are typical for R&S RT-ZC31.
Typical Characteristics
To Next Page
