R&S RT-ZC31 - Page 13

Product Description
R&S
®
RT-ZC31
13User Manual 1801.4949.02 ─ 01
4 = Serial number
5 = Power plug
6 = Shell
Unlock lever
The lock mechanism keeps the clamp closed.
Vents
The vents are on the sides and bottom. Do not clog them.
Power plug
Connect the plug to the R&S RT-ZA13 probe power supply receptacle to supply
power to the sensor.
Shell
Pull on the power plug while simultaneously pulling this shell to disconnect the
plug.
Description of the Probe