4 | How to work with the unit
16 / 104 Operating instructions
4.3.3 Date, time, status
In the footer, you can see the current date and time at all times, as well as the status of the following ports and
connections:
USB flash drive connected
This symbol shows that you have connected a USB flash drive or a USB accessory to the unit.
Network connection
This symbol indicates that you are connected to the router but not to the Internet:
This symbol shows that your unit is connected to a LAN network. If there is a network error, the following symbol
will be displayed:
WiFi connection (optional)
This symbol shows that your unit is connected to the WLAN network. The connection quality is very good.
If the connection quality decreases, the following symbols will be displayed:
This symbol indicates that you are connected to the router but not to the Internet:
If there is a connection error, the following symbol will be displayed:
Please note that this function is optional in the 2-XS model.
Error report
This symbol shows that an error message is displayed on the display.
ConnectedCooking connection
This symbol shows that your unit is connected to ConnectedCooking. If your cooking system is not connected to
ConnectedCooking, the following symbol will be displayed:
Energy optimisation
The symbol will appear in the footer on the start screen as soon as there is a heating request that cannot be
met.
The purpose of energy optimisation is to make maximum use of the electrical power in the kitchen.
Power failure
In the event of a power failure, the following symbol will be displayed in the footer.
It will go out when a new cooking application is selected. To do this, return to the start page.
The duration of the power failure will determine whether a cooking path will continue or restart and this will
depend on the respective cooking path and cooking method.
Example:
If there is a power cut during a low temperature cooking process, the cooking process will be interrupted.
If the power cut lasts less than 15 minutes, the cooking process will continue.
If the power cut lasts longer than 15 minutes, the unit will switch to standby mode after the power cut. You must
restart the cooking process to finish cooking the food.
4.3.4 Help displayed on the unit
Help displayed on the unit
Selecting the question mark icon will take you to the integrated help function in the cooking system. Here you will
find a digital description of how to use your cooking system. The help function is context-sensitive, so the help
function for the current screen content is always shown first. The help function also provides detailed information
on each cooking method, as well as useful tips.
To Next Page
Loading...
