11 | Settings
Operating instructions 71 / 104
11.6.2 Secondary country cuisine
You can add an additional country cuisine to the primary country cuisine. This allows you to prepare typical dishes
from 2 countries at the same time. This is an advantage, for example, if your restaurant wants to offer a special
weekly menu with another country cuisine.
1. Press the button Secondary country cuisine
2. Scroll through the list and select the desired secondary country cuisine.
>> The country cuisine is immediately adopted. In the iCookingSuite, the additional intelligent cooking paths of
the secondary country cuisine are displayed and marked with . The settings of the cooking parameters are
still influenced by the primary country cuisine [}70].
11.7 Data management
Please note that the data management functions are only available if you connect a USB flash drive to the unit.
1. Press the button
2. Press the button Data management
You can adjust the following settings:
n
Export all data [}71]
n
Cooking programs [}71]
n
User profile [}72]
n
User images [}72]
n
User data: Delete all [}73]
n
Basic unit settings [}73]
n
HACCP data [}73]
n
Service [}73]
n
Export MyDisplay
11.7.1 Export all data
a You have connected a USB flash drive to the unit.
1. Press the button Export all data
>> You can now export all data to a USB flash drive.
11.7.2 Cooking programs
Here you can export, import or delete all the programs you have created.
Export programs
a You have created programs in the programming mode.
a You have connected a USB flash drive to the unit.
1. Press the button Export programs
>> The saved programs are saved on the USB flash drive.
Import programs
1. Connect a USB flash drive containing the exported programs to the unit.
2. Press the button Import programs
>> The saved programs are imported and displayed in programming mode.
Programs: Delete all own
Here you can delete all programs you have created.
1. Press the button
To Next Page
Loading...
