4 | Transport
80.06.070_iCombi Pro-iCombi Classic_IM_V01_en-GB 25 / 92
4. Lift the unit with the carrying straps. Note the minimum required number of
persons for lifting and transporting the unit according to the unit weight.
5. Transport the unit with the carrying straps and place it on its intended in-
stallation surface.
6. Press the carrying strap buckles down and pull the carrying straps out of the
side slots.
7. Slide the gasket back into its slot in the base frame.
>> The unit is standing on its intended installation surface and is ready for in-
stallation.
To Next Page
Loading...
Need help?
General