Rational SelfCooking Center - Change password

- 43 -
Setting Program Lock:
New programs cannot be created when
„Program Lock“ is set. You can use existing
programs, but not change, copy or delete them.
or
Only cooking programs can be used. Manual
operation is not possible.
Enter password
Use central dial to dial desired letter or number
and press central dial to select.
Default password „12345”
Program lock active
Program lock inactive
Change password
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
Enter password:
Use central dial to dial desired letter or number
and press central dial to select.
Programming-Mode – “Program Lock“
_xxxx
enter password
ABCDEF G HIJKLM
5
4
change password
_xxxx
enter old password
ABCDEF G HIJKLM
5
6
enter new password
7
ABCDEF G HIJKLM
8
repeat new password
9
ABCDEF G HIJKLM
1
2
3
Prog
1
2
3
Prog
4
Level 1
4
Level 2