Rational SelfCooking Center - Factory Default, Buzzer Sound and Time, Display Contrast, Cleanjet Prompt

- 63 -
Modifying the basic settings
Factory Defaults
Briefl y press key 1x, a red frame fl ashes.
Hold key down until the background changes
from red to blue.
Press the button to reset the basic settings
(language, temperature unit, buzzer tone, time
unit, display settings, forced clean) to their
factory defaults.
Buzzer – Tone setting
Rotate the central dial to select the desired
signal tone.
Buzzer – Time setting
Turn the central dial to set the duration of the
signal tone from 30 seconds to 240 seconds or
to continuous tone..
Display Contrast setting
Rotate the central dial to change the contrast
on the display. The factory default is reset
automatically to ensure maximum indicator life.
CleanJet
®
Request time setting
The operating hours time for the automatic cleaning
request is set using the CleanJet
®
Request function.
For description see CleanJet
®
chapter.
Factory default, buzzer sound and time,
display contrast, CleanJet
®
prompt
1 2
settings
3
3
4
3
4
30 sec
3
4
3
4
24:00
5