Rational SelfCooking Center - Help Function

- 15 -
Selecting a function
Examples:
Press button
Short bleep and fl ashing red light confi rms button
has been pressed.
Active button is surrounded by fl ashing red frame.
The central dial can be used to enter data while the
button is fl ashing.
Confi rmation of data input
takes place automatically after 4 seconds.
or
press (Push Function) on central dial
or
press any button.
Preheat display
The status of the preheating temperature is
displayed in red and blue.
Central dial
You can enter your desired values by rotating the
central dial.
Push Function
Entries can be confi rmed by pressing the central
dial.
End of cooking process
The end of a cooking process is indicated by the
fl ashing SelfCooking Control
®
button.
Cooking processes can be interrupted by pressing
the SelfCooking Control
®
button (4 seconds)
Unit too hot
If the cooking cabinet is hotter than the
temperature set, the button for the mode selected
will fl ash (e.g. Dry Heat).
(See „Cool Down“ chapter for cooking cabinet
cooling).
Help Function
This will give you handy tips on everyday
use (see also Help Function chapter)
General User Instructions
preheat
Your SelfCooking Center
®
has a touch screen. You
can enter data on your SelfCooking Center
®
by just
touching it lightly with your fi nger.