19
Windows
4.Installing Utility
You can do the followings with the bundled utility:
-You can configure settings for the SCSI device.
-You can update the firmware on the FR1SX.
-You can format a HDD, MO, Zip, Jaz, etc.
Follow the steps to install it:
If you use Windows, proceed to Chapter 4-1.
If you use Mac, proceed to Chapter 4-2.
4-1.Installing on Windows
1)Click the hardware removable icon on the TaskBar. Select the pop-up menu
saying [Stop xxx-Disk(X:)]. “You can safely remove the device” message
will appear. Click [OK]. Then, remove the 1394 cable from the FR1SX.
2)Insert the bundled CD-ROM.
3)Start the [Setup.exe] file at the CD-ROM and follow the instructions.
4)After the installation, you can find [FR Format utility] and
[FR Configuration] in the [RATOC FireWire Utility] in the [Programs]
on the [Start] menu. Refer to Chapter 4-1-1 for the FR Format utility
information and Chapter 4-1-2 for the FR Configuration information.
To Next Page