50
5-7.Wrong drive name appears on the removable icon
(Win98SE/Win Me)
When you click the hardware removable icon on the TaskBar, you may see a
wrong drive name. This happens on Windows 98 SE or Me.(The following
screen shows a example when you connect a CD-R drive. It shows IEEE 1394
Disk, instead of CD-ROM.)
Follow these steps through to show the right drive name.
1)Open [Device Manager].
2)When you use Windows 98 SE, you can find a string named [IEEE1394
CD-ROM], [IEEE1394 Disk], or [IEEE1394 Optical Disk] under the
[Storage device]. When you use Windows Me, you can find a string named
[IEEE1394 CD-ROM],[IEEE1394 Disk],[IEEE1394 Floppy],[IEEE1394
Optical Disk] or [IEEE1394 Tape] under the [Storage device].
Double click the wrong drive name string.
3)You will see the properties window. Click the [Driver] tab and click
[Update Driver].
4)[Update Device Driver Wizard] will start up. When you use Windows Me,
check [Specify the location of the driver(Advanced) ] and click [Next].
When you use Windows 98 SE, just click [Next].
To Next Page