EasyManua.ls Logo

Ratoc Systems FR1SX - 1-2.System Requirements and Restrictions

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
1-2.System Requirements and Restrictions
OS
•Mac OS X-10.1.x or above/Mac OS 9.1 or above
•Windows XP/2000/Me/98SE
SCSI device
•High-Density 50 pin female SCSI-2 connector on a SCSI device
•Term-Power output capability
(Caution)As FR1SX gets electric power from Term-Power on
SCSI bus, this output capability is required. If Term
-Power output is not available at your SCSI device such
as iomega zip drive, you must use an OPTIONAL AC
Adapter(sold separately). Refer to Chapter 5-4 and 7.
•Single-End interface
•Terminator
Mac, PC
•1394 port
•You can’t daisy-chain SCSI devices.You can connect only one SCSI
device to the FR1SX.
If you want to daisy-chain SCSI devices, you have to connect those
devices via 1394 interface.

Table of Contents