49
5-6.How to attach to the SCSI-1(Centronics50P, DB25)
device(Win/Mac)
1)If you have a SCSI device with a Low-Density Centronics 50 pin
connector, a High-Density 50 pin(Female) to Low-Density Centronics 50
pin(Male) adapter(RCL-3005) is available from us. You can connect
your SCSI device, using this adapter.For purchasing information, refer to
Chapter 7.
2)If you have a SCSI device with a DB25 pin connector, a High-Density 50
pin(Female) to DB25 pin(Male) adapter(RCL-3025) is available from
us. You can connect your SCSI device, using this adapter. For purchasing
information, refer to Chapter 7.
To Next Page